products > multimedia > XE300
Features
- Common Features:
- Two External SATA-II (eSATA) connectors
- ExpressCard/34 module card for desktop or notebook computer (Note: For desktop PC installation, a PCI-Express to ExpressCard™ adapter card must be installed first.)
- Fully compliant with Serial ATA 1.0 specifications
- Support NCQ Commands
- Hot-plug and hot swap compatibility
Specification
- Host interface
- ExpressCard™ bus version 1.0a compliant
- ExpressCard/34 Module – PCI Express standard
- External SATA interface
- 48 bits LBA can break the capacity barrier. Support SATA hard disk large than 137GB
- Support SATA-II transfer rate of 3.0Gbps
- Onboard bus master engine relieves the system processor and enhances system performance
- Features independent 256-byte FIFOs per channel for host reads and writes
- Supports two independent Serial ATA channels:
- Supports Native Command Queuing (NCQ)
- Supports Non-zero offsets NCQ
- Supports Out of order data delivery NCQ
- Supports FIS-based switching with Port Multipliers
- Support RAID5 and JBOD features with SATA port multiplier(Note: SATA port multiplier is not included in the package)
- 100% RoHS compliant
Package Contents
- Inno3D® XE300 ExpressCard/34 standard module
- Driver CD disc
- Quick Installation Guide
System Requirements
- IBM® PC desktop or notebook computer with ExpressCard/34 or ExpressCard/54 module slot
- 128MB system memory
- One available ExpressCard™ 34 or ExpressCard™ 54 Slot
- CD-Rom drive for driver and application installation
- 100MB free disk space for driver and application install
-
Operation System Support:
- Microsoft® Windows® XP –SP2 / Microsoft® Windows Server 2000 / 2003 and Windows Vista™ 32bits and 64bits edition
Drivers Download